There were a few of us in TS last night pondering what track to run. Given the uncertainty behind grid size it was thought a small, familiar track would suit this session best.
After some discussion we came to the conclusion that Summit Point Short would work well and boy did it not disappoint. It was an absolutely excellent venue for a smaller grid, fast, technical and intimate.
Great racing with you guys last night. It was one of the best sessions I've been in to date.
@ Davey, this is probably the first time I've had someone on my bumper for that many laps. I think between the Qualify Race and the Official Race, we must have been on each others bumper for close to 30 laps.
I also figured out what I did wrong on the Grid last night so hopefully I can have that sorted for the next race.
Oh and now I have the Pace Car every time, yay!
Good win Noel!
Structural Changes to Race Format as follows:
Qualify Race: (Session 1)
- Qualify Race now 20 minutes. This allows the fast guys to move higher up in the field.
- Session Type: Open Practice + Race
- Fuel load 50%
- Track Conditions: Automatically clean marbles (OFF)
- Track State: Open Practice -> Low Usage 20%
- Track State: Race -> Carry over track state from previous session.
- League Session Grid Builder: Load all League Drivers
- Configure Grid Automatically: Inverted (discussion on this setting to follow in another thread)
- Start Type: Rolling
- 1 fast repair
Race: (Session 2)
A mandatory Pit Stop is required half way through the race within a 5 minute window (30 minute races) or 10 minute window (60 minute races). As we're still in the R&D Stages, all Drivers are expected to take
4 tires and
full fuel.
Those who Pit outside this window will need to serve a drive through penalty.
- Session Type: Open Practice + Race
- Fuel load 30%
- Track Conditions: Automatically clean marbles (OFF)
- Track State: Open Practice -> Moderately Low Usage 40%
- Track State: Race -> Carry over track state from previous session.
- League Session Grid Builder: Load all Drivers from previous Session
- Configure Grid Automatically: Sequential
- Start Type: Rolling
- 1 fast repair
The settings above will be published in a thread for discussion and alterations as required.